3D打印用于青少年Salter-HarrisⅡ型桡骨远端骨折辅助治疗的临床效果分析

doi:10.13418/j.issn.1001-165x.2018.03.023

Abstract

Abstract:

Objective　To investigate the value of 3D printing technology in the treatment of unstable distal radius fractures of children and adolescents with Salter-Harris II type. Methods The clinical data of 19 cases with unstable distal radius fractures of Salter-Harris type II with 3D printing technique were retrospectively analyzed. The basic parameters such as operation time and intraoperative blood loss were recorded. The growth of the affected limb, recovery of wrist joint function, and complications after follow-up were recorded. The clinical efficacy was preliminarily evaluated. Results The direction, length, and diameter of the needle in the 19 patients were consistent with the preoperative simulation. Operating time was 17~39 min, with an average of 21.6 min; intraoperative blood loss was 0~10 ml, with an average of 4.5 ml; intraoperative fluoroscopy was used 4 to 6 times, with an average of 5 times; anatomical reduction of fractures were achieved in 17 cases, and postoperative fracture displacement less than 2 mm was achieved in 2 cases. All 19 patients were followed up for 12 to 20 months with an average of 14.5 months. All the affected limbs reached bone healing. Postoperative assessment of wrist function was performed using the Gartland-Werley scoring system 12 months after surgery: excellent in 18 cases, and normal in 1 case. Conclusion 3D printing technology as an auxiliary technique has certain clinical application value for children and adolescents with unstable Salter-Harris type II distal humeral fracture.

Key words: 3D printing technology；　Radius fracture；　Epiphyseal, 　Youth

ZHAO Jing-xin, MA Ya-chang, ZHU Ya-wen, YANG Zhao-xin, QIU Yu-chen, MIAO Wei, WANG Yu, JIN Yu. Clinical efficacy analysis of 3D printing as assisted therapy for youth Salter-HarrisⅡ distal fracture of radius[J]. Chinese Journal Of Clinical Anatomy, 2018, 36(3): 346-348.

References

[1] 宫福良, 李杰, 范钦波, 等. 三种不同方法治疗桡骨远端不稳定骨折的功能对比研究[J]. 中国骨与关节损伤杂志, 2011(9):842-843.
[2] Bumei G，Gavriliu S，Georgescu I，et al． The therapeutic attitude in distal radial Salter and Harris type Ⅰ and Ⅱ fractures in children[J]．J Med Life，2010，3(1):70-75．
[3] Randsborg PH, Sivertsen EA. Classification of distal radius fractures in children: good inter- and intraobserver reliability, which improves with clinical experience[J]. Bmc Musculoskeletal Disorders, 2012, 13(1):1-8.
[4] Xu GG, Chan SP, Puhaindran ME, et al. Prospective randomised study of intra-articular fractures of the distal radius: comparison between external fixation and plate fixation[J]. Ann Acad Med Singapore, 2009, 38(7):600-606.
[5] Kwon D G, Chung C Y, Lee K M, et al. Revisit of Broden's view for intraarticular calcaneal fracture[J]. Clin Orthop Surg,2012, 4(3): 221-226.
[6] 陈雁西, 俞光荣. 踝关节骨折的治疗策略与数字化临床路径[J]. 中华骨科杂志, 2011, 31(3): 275-284.
[7] 郑锋, 余正希, 陈宣煌,等. 基于数字化设计和3D打印胫骨近端骨折内固定的关键技术[J]. 中国组织工程研究, 2016, 20(26):3837-3842.
[8] 黄恺, 丁亮华, 胡新宇, 等. 计算机辅助设计数字化个体钢板内固定治疗复杂胫骨平台骨折短期临床疗效分析[J]. 中国骨与关节损伤杂志, 2013, 28(4): 324-326.
[9] 吴章林, 林海滨, 张国栋, 等. 3D打印应用于髋臼骨折数字化设计的实验研究[J].中国临床解剖学杂志, 2014, 32(3):248-251.
[10]Brown GA, Firoozbakhsh K, DeCoster TA, et al. Rapid prototyping: the future of trauma surgery[J]? J Bone Joint Surg Am, 2003, 85(Suppl 4):49-55.
[11]Bagaria V, Deshpande S, Rasalkar DD, et al. Use of rapid prototyping and three-dimensional reconstruction modeling in the management of complex fractures[J]. Eur J Radiol, 2011, 80(3):814-820.
[12]欧阳振, 刘丰虎, 杨斌辉,等. 闭合复位经皮克氏针内固定治疗桡骨远端不稳定骨骺骨折[J]. 中国骨与关节损伤杂志, 2013, 28(11):1084-1085.
[13] Gartland JJ Jr，Werley CW. Evaluation of healed Colles' fractures[J]. J Bone Joint Surg Am，1951，33：895-907.
[14]Riesenkampff E，Rietdorf U，Wolf I，et al. The practical clinicalvalue of three-dimensinal models of complex congenitally malformed hearts[J]. J Thorac Cardiovac Surg，2009，138(3)：571-580.
[15]Mao K, Wang Y, Xiao S, et al. Clinical application of computer-designed polystyrene models in complex severe spinal deformities: a pilot study[J]. Eur Spine J, 2010,19(5):797-802.

Clinical efficacy analysis of 3D printing as assisted therapy for youth Salter-HarrisⅡ distal fracture of radius

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 2

Metrics

Comments

Recommended 0

[1]	Zhao Zhiheng, Wu Yue, Zhang Jing, Yang Zitao, Zhang Qinyong, Wang Qingwei, Cheng Jingliang , Che Yingyu. Comparative study of anatomical structure and functional characteristics of pelvic floor in normal young men and women by static and dynamic magnetic resonance imaging [J]. Chinese Journal of Clinical Anatomy, 2023, 41(2): 143-149.
[2]	. Three-dimensional digital measurement of facial anatomy parameters of young Mongolian college students in Inner Mongolia [J]. Chinese Journal of Clinical Anatomy, 2021, 39(3): 252-258.