[1] Gonzalez D, Ardura AF, Sanjuan JC, et al. C1-C2 rotatory subluxation in adults "A Narrative Review"[J]. Diagnostics (Basel), 2022, 12(7): 1615. DOI: 10.3390/diagnostics12071615.
[2] 宋梅, 赵改平, 段婉茹, 等. 不同后路内固定治疗颅底凹陷寰枢椎脱位的生物力学研究[J]. 医用生物力学, 2023, 38(1):37-44. DOI:10.16156/j.1004-7220.2023.01.005
[3] Goel A, Laheri V. Plate and screw fixation for atlanto-axial subluxation[J]. Acta Neurochir (Wien), 1994, 129(1-2): 47-53. DOI: 10.1007/BF01400872.
[4] Harms J, Melcher RP. Posterior C1-C2 fusion with polyaxial screw and rod fixation[J]. Spine (Phila Pa 1976), 2001, 26(22):2467-2471. DOI: 10.1097/00007632-200111150-00014.
[5] Butt BB, Gagnet P, Piche J, et al. Lateral mass screw placement in the atlas: description of a novel surgical technique, radiographic parameters, and review of the literature[J]. J Spine Surg, 2021, 7(3): 335-343. DOI: 10.21037/jss-20-566.
[6] Liawrungrueang W, Riew KD, Sugandhavesa N, et al. Atlas (C1) lateral mass screw placement using the intersection between lateral mass and inferomedial edge of the posterior arch: a cadaveric study[J]. Eur Spine J, 2022, 31(12):3443-3451. DOI: 10.1007/s00586-022-07385-7.
[7] Bunmaprasert T, Puangkaew W, Sugandhavesa N, et al. The intersection between lateral mass and inferomedial edge of the C1 posterior arch: a reference point for C1 lateral mass screw insertion[J]. Neurospine,2021,18(2):328-335. DOI: 10.14245/ns.2040814.407.
[8] Singh DK, Shankar D, Chand VK, et al. C2 superior facetal osteotomy: a novel technique in complex craniovertebral junction surgery for C1 lateral mass screw placement[J]. Asian Spine J, 2023, 17(6):1125-1131. DOI:10.31616/asj.2023.0216.
[9] Du YQ, Yin Y H, Li T, et al. A novel surgical protocol for safe and accurate placement of C1 lateral mass screws in patients with atlas assimilation, basilar invagination and atlantoaxial instability: technical details, accuracy assessment and perioperative complications[J]. Eur Spine J, 2021, 30(6):1585-1595. DOI: 10.1007/s00586-021-06780-w.
[10] Dewan MC, Godil SS, Mendenhall SK, et al. C2 nerve root transection during C1 lateral mass screw fixation: does it affect functionality and quality of life? [J]. Neurosurgery, 2014, 74(5):475-481. DOI: 10.1227/NEU.0000000000000306.
[11] Lee HR, Lee DH, Cho JH, et al. Feasibility of lateral mass screw insertion in patients with the risky triad of C1: evaluation of the over-the-arch technique[J]. J Neurosurg Spine, 2021, 36(5):822-829. DOI: 10.3171/2021.8.SPINE21695.
[12] Tan M, Wang H, Wang Y, et al. Morphometric evaluation of screw fixation in atlas via posterior arch and lateral mass[J]. Spine (Phila Pa 1976), 2003, 28(9):888-895. DOI:10.1097/01.BRS.0000058719.48596.CC.
[13] 马向阳, 尹庆水, 吴增晖, 等. 寰椎椎弓根与枢椎侧块关系的解剖与临床研究[J]. 中华骨科杂志, 2004, 24(5): 295-298. DOI: 10.3760/j.issn:0253-2352.2004.05.009
[14] Huang DG, Hao DJ, He BR, et al. Posterior atlantoaxial fixation: a review of all techniques[J]. Spine J, 2015, 15(10):2271-2281. DOI: 10.1016/j.spinee.2015.07.008.
[15] Tan M, Dong L, Wang W, et al. Clinical application of the "pedicle exposure technique" for atlantoaxial instability patients with a narrow c1 posterior arch[J]. J Spinal Disord Tech, 2015, 28(1):25-30. DOI: 10.1097/BSD.0000000000000078.
[16] Yi P, Dong L, Tan M, et al. Clinical application of a revised screw technique via the C1 posterior arch and lateral mass in the pediatric population[J]. Pediatr Neurosurg, 2013, 49(3):159-165. DOI:: 10.1159/000358807.
[17] Zhang L, Wang H. Biomechanical Effects of Lateral Inclination C(1) and C(2) Pedicle Screws on Atlantoaxial Fixation[J]. Orthop Surg, 2021, 13(7):2027-2033. DOI: 10.1111/os.13137.
[18] Huang DG, He SM, Pan JW, et al. Is the 4 mm height of the vertebral artery groove really a limitation of C1 pedicle screw insertion? [J]. Eur Spine J, 2014, 23(5):1109-1114. DOI: 10.1007/s00586-014-3217-y.
[19] Jin GX, Wang H, Li L, et al. C1 posterior arch crossing screw fixation for atlantoaxial joint instability[J]. Spine (Phila Pa 1976), 2013, 38(22): E1397-E1404. DOI: 10.1097/BRS.0b013e3182a40869.
[20] Liu C, Kamara A, Yan Y. Biomechanical study of C1 posterior arch crossing screw and C2 lamina screw fixations for atlantoaxial joint instability[J]. J Orthop Surg Res,2020,15(1):156. DOI: 10.1186/s13018-020-01609-6.
[21] Shen K, Deng Z, Yang J, et al. Biomechanical study of novel unilateral C1 posterior arch screws and C2 laminar screws combined with an ipsilateral crossed C1-C2 pedicle screw-rod fixation for atlantoaxial instability[J]. Arch Orthop Trauma Surg, 2017, 137(10):1349-1355. DOI: 10.1007/s00402-017-2781-0.
[22] Wright NM. Posterior C2 fixation using bilateral, crossing C2 laminar screws: case series and technical note[J]. J Spinal Disord Tech, 2004, 17(2):158-162. DOI: 10.1097/00024720-200404000-00014.
[23] 马向阳, 尹庆水, 吴增晖, 等. 枢椎椎板螺钉固定的解剖可行性研究[J]. 中国脊柱脊髓杂志, 2006, 16(1):48-51.
[24] Gorek J, Acaroglu E, Berven S, et al. Constructs incorporating intralaminar C2 screws provide rigid stability for atlantoaxial fixation[J]. Spine (Phila Pa 1976),2005,30(13):1513-1518. DOI: 10.1097/01.brs.0000167827.84020.49.
[25] Paramore CG, Dickman CA, Sonntag VK. The anatomical suitability of the C1-2 complex for transarticular screw fixation[J]. J Neurosurg, 1996, 85(2):221-224. DOI: 10.3171/jns.1996.85.2.0221.
[26] Ma W, Feng L, Xu R, et al. Clinical application of C2 laminar screw technique[J]. Eur Spine J,2010,19(8):1312-1317. DOI: 10.1007/s00586-010-1447-1.
[27] 马向阳, 邹小宝, 付索超, 等. 枢椎棘突椎板螺钉固定技术的建立与初步临床应用[J]. 中华骨与关节外科杂志, 2023,16(5):408-413. DOI: 10.3969/j.issn.2095-9958.2023.05.03
[28] 王向阳, 徐华梓, 池永龙, 等. 改良枢椎椎板螺钉置钉方法的临床应用[J].脊柱外科杂志,2016,14(4):216-219. DOI: CNKI:SUN:JZWK. 0.2016-04-008
[29]马向阳, 尹庆水, 吴增晖, 等. 枢椎椎弓根螺钉进钉点的解剖定位研究[J]. 中华外科杂志, 2006, 44(8):562-564. DOI: 10.3760/j:issn:0529-5815.2006.08.018
[30] Resnick DK, Lapsiwala S, Trost GR. Anatomic suitability of the C1-C2 complex for pedicle screw fixation[J]. Spine (Phila Pa 1976),2002,27(14):1494-1498. DOI: 10.1097/00007632-200207150-00003.
[31] Lee KH, Kang DH, Lee CH, et al. Inferolateral entry point for c2 pedicle screw fixation in high cervical lesions[J]. J Korean Neurosurg Soc,2011,50(4):341-347. DOI: 10.3340/jkns.2011.50.4.341.
[32] Kepler CC, Fang T, Bronson WH, et al. The C2 "Parsicle" Screw: Introduction of a Novel Posterior Surgical Technique For Upper Cervical Fixation[J]. Clin Spine Surg,2020,33(4):146-149. DOI: 10.1097/BSD.0000000000000871.
[33] Patkar SV. New entry point for C2 screw, in posterior C1-C2 fixation (Goel-Harm's technique) significantly reducing the possibility of vertebral artery injury[J]. Neurol Res, 2016, 38(2):93-97. DOI: 10.1080/01616412.2015.1105582.
[34] 高延征, 高坤, 余正红, 等. “in-out-in”多皮质枢椎椎弓根螺钉在寰枢椎脱位或不稳后路手术中的应用[J]. 中国脊柱脊髓杂志, 2017, 27(1):55-60. DOI: 10.3969/j.issn.1004-406X.2017.01.10
[35] 高坤, 高延征, 邵佳, 等. 枕颈后路术中置入"in-out-in"枢椎椎弓根螺钉对椎动脉影响的观察研究[J]. 中华创伤骨科杂志,2022, 24(11):972-977.
[36] 张修儒, 高延征, 高坤, 等. 寰枢椎脱位伴复杂椎动脉变异的枢椎置钉策略[J]. 中华骨科杂志, 2023, 43(9):543-549. DOI: 10.3760/cma.j.cn121113-20221112-00656
[37] Moftakhar P, Gonzalez NR, Khoo LT, et al. Osseous and vascular anatomical variations within the C1-C2 complex: a radiographical study using computed tomography angiography[J]. Int J Med Robot,2008,4(2):158-164. DOI: 10.1002/rcs.193.
[38] Goel A, Rangnekar R, Shah A, et al. Mobilization of the Vertebral Artery-Surgical Option for C2 Screw Fixation in Cases With "High Riding" Vertebral Artery[J]. Oper Neurosurg (Hagerstown), 2020, 18(6):648-651. DOI: 10.1093/ons/opz289.
[39] Du YQ, Yin YH, Qiao GY, et al. C2 medial pedicle screw: a novel "in-out-in" technique as an alternative option for posterior C2 fixation in cases with a narrow C2 isthmus[J]. J Neurosurg Spine, 2020, 33(3): 281-287. DOI: 10.3171/2020.2.SPINE191517.
[40] 高坤, 高延征, 邵佳, 等. 内侧"in-out-in"枢椎椎弓根螺钉在上颈椎手术中的应用研究[J]. 中华神经医学杂志,2022, 21(8):789-794. DOI: 10.3760/cma.j.cn115354-20220511-00320
[41] Guo Q, Zhou X, Guo X, et al. C2 partial transpedicular screw technique for atlantoaxial dislocation with high-riding vertebral artery: A technique note with case series[J]. Clin Neurol Neurosurg, 2021, 200:106403. DOI: 10.1016/j.clineuro.2020.106403.
[42] 马向阳, 尹庆水, 夏虹, 等. 枢椎后路侧块螺钉固定的解剖研究[J]. 中国脊柱脊髓杂志, 2004, 14(7):33-36. DOI: 10.3969/j.issn.1004-406X. 2004.07.006
[43] 刘磊, 廖文波, 范红松, 等. 枢椎后路改良侧块螺钉钉道的CT测量[J]. 遵义医学院学报, 2017, 40(2):200-203. DOI: 10.3969/j.issn.1000-2715.2017.02.017
[44] Zhou S, Yuan B, Liu W, et al. Three-dimensional reduction method with a modified C2 isthmus screw in irreducible atlantoaxial dislocation: a technical note[J]. BMC Surg, 2021,21(1):324. DOI: 10.1186/s12893-021-01321-0.
[45] Shao M, Dai Y, Zhu W, et al. Bicortical Short C2 Pars Screw Fixation for High-Riding Vertebral Artery Provided Sufficient Biomechanical Stability: A Finite Element Study[J]. Spine (Phila Pa 1976),2022,47(4):369-375. DOI: 10.1097/BRS.0000000000004141.
[46] 卢敏明, 唐一钒, 陈雄生. 后路枢椎峡部螺钉固定技术的研究进展[J]. 中华骨科杂志, 2022, 42(23):1588-1594.
[47] 孙岩, 谭明生. 寰枢椎脱位翻修手术原因及策略研究进展[J]. 中国骨伤, 2022, 35(5): 495-499.
[48] Wang Y, Wang C, Yan M. Clinical Outcomes of Atlantoaxial Dislocation Combined with High-Riding Vertebral Artery Using C2 Translaminar Screws[J]. World Neurosurg,2019,122: e1511-e1518. DOI: 10.1016/j.wneu.2018.11.092.
[49] 张修儒, 高延征, 高坤, 等. 寰枢椎脱位术后翻修的手术策略分析[J]. 中国脊柱脊髓杂志,v2023, 33(11):961-969.
[50] Ma X, Zou X, Chen Z, et al. Surgical Failure and Revision Strategy for Atlantoaxial Dislocation: A retrospective study of 109 Cases[J]. Spine (Phila Pa 1976),2023. DOI: 10.1097/BRS.0000000000004894.
|